K4503.040VT

Name: K4503.040VT
SKU: K4503.040VTBLA
Availability: OutOfStock

$459.26

Plate Diameter (mm)

Plate Thickness

Plate Arbor

Pinholes

Plate Coating

Material You Are Cutting

Tooth Count

Grind

Customized Laser Etching

Clear

Coldsaw Blade – 450 X 3.0 X 40 – Vapor Treated (VT)

Plate Diameter (mm)	450mm
Plate Thickness	3.0mm
Plate Arbor	40mm
Pinholes	2/9/55 & 4/12/64
Plate Coating	Vapor Treated (VT)
Tooth Count Information	Tips on Tooth Count: -Typically, it is ideal to have about 2-3 teeth engaged in the work at all times (consider both walls of tubing). -Too few teeth may cut faster, but you risk stripping teeth or breaking the blade. -Too many teeth may cut smooth, but your cut time will increase and the blade will dull prematurely.
Grind Information	"Bw" Grind (Alt. Chamfer): -A "Bw" grind is used to cut smaller, thinner sections like thin-wall tubing. It is ground on all blades with a tooth pitch of less than 4.5mm "C" or "HZ" grind: -"C" grind is used to cut heavier, thicker sections and large solids. It is ground on all blades with a tooth pitch of 4.5mm and greater.